PP PPR Plastic Pipe Making Machine 20-63mm Multi-Layer Extrusion Production Line for Water Supply

• Product Type: PPR Pipe
• Screw No.: Multi-screw
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008
• Customized: Customized
• Model NO.: YS series
• Condition: New
• Specification: PPR extrusion line
• Trademark: YUSHENG
• Origin: Zhangjiagang City (Near Shanghai), China
• HS Code: 8477800000
• Production Capacity: 10 Sets Per Month

Product Description

Product Description

pp ppr plastic pipe making machine 20-63mm multi-layer extrusion production line for water supply

Product Application

PP-R Pipe machine is mainly used in the production of agricultural drainage, water supply and drainage, and cable laying,etc. purposes. The unit consists of single extruder machine, mold, vacuum forming tank, multi-claw haul-off machine, planetary(chipless/non-dust cutter) cutting machine, stacker and so on. And the line can be equipped with Comptroller thickening instrument or computer ink-jet printer, etc. to achieve the production and manufacture of high-grade tubing.

Model	SJ65/30	SJ65/30	SJ75/30	more models based on your requirements
Pipe diameter range(mm)	16-63	20-110	50-160
Screw diameter(mm)	65	65	75
L/D	30:1	30:1	30:1
Motor power(kw)	37	37	55
Drawing speed(m/min)	0-10	0-8	0-8
Output(kg/h)	40-80	60-120	80-160
Total length(m)	25	25	28

 

Main Features

Why we produce three-layer pipe instead of single layer:
1. Reduce the production cost. Ususally middle pipe layer will use recycled material, it will reduce your raw material cost, and will not affect the pipe quality.
2. Increase the pipe toughness. Some customer will use glass fiber material in the middle layer, it will be increase the pipe toughness.

 

	Single screw extruder Drive motor: Siemens Beide motor Inverter: ABB Temperature control: Omron Contactor: Siemens For 20-63mm three layer pipe machine, if you have specific requirement for each layer percentage, we suggest you use three extruder co-extrusion, otherwise 2 sets extruder coextrusion is enough.
Extrusion mould Material: 40Cr Calibrator: Stainless steel  It will be much better if you can tell us the specific pipe size(pipe diameter & pipe thickness or pressure) you want to produce, then we can suggest you the most suitable machine based on your requirements.
	Calibration Tank Material: Stainless steel Tank Movement : Forth and back by motor driven Up and down by manual adjust
Spraying Cooling Tank Material: Stainless steel Length: 6m or customized
	Haul-off Machine Haul-off Speed Adjustive: ABB inverter Above Haul-off Bracket Compaction Mode: Adopt pneumatic gas cylinder
Cutting Machine Cutting Saw: Adopt Alloy Steel Saw Machine Type: No dust cutting machine This type cutting machine can reduce the dust in your factory, and with lower norise.
	Stacker Laying Board Material: 1.5mm Stainless Steel Board Stacking Mode: Stacking by Gas Cylinder, adopt Limited Switch Send out Cutting Signal